Cement pressure plate as floor installation skills

Cement pressure board can be used as floor according to its high strength characteristics. Cement pressure board is a product made by about 6000 tons of machine high pressure. Cement pressure board is widely used as floor or external wall, because its high density and thickness determine that the use of cement pressure board in floor is a good now. Because of the strong bearing capacity to a large extent to ensure safety. The following small make up will take you to have a look!

Floor installation skills of cement pressure plate

The weld strength shall conform to GB-T5185-1985. The welds on the contact surface with the cement pressure plate should be smoothed before slab.

1> Beam welding must be in accordance with GB/T985-1988 specifications. The scale conforms to the drawing planning request.

2> When the cement pressure plate is used as the floor, the joint margin between the plate and the plate falls on the same beam, and the plate joint is filled with silicone rubber seal, or cement mortar.

3> Any edge of the cement pressure plate shall not be suspended, and the long side of the plate shall be placed perpendicular to the direction of the support beam with a large span as far as possible. Board and wall separation, fixation only along the long side of the board and beam touch the center of the fixed, the short side of the wall is not fixed, but there must be a beam. Other associated short edges should be fixed.

4> The center of the fixed nail is within 300mm-600mm from the thickness of the visual board and the field situation, and the center of the nail hole is 20mm from the edge of the board